| |
| ≡ Short Path Evaporator |
>>>>Present
page ：Short Path Evaporator |
|
|
Characteristic
of the device ： |
|
● Thing pharmaceutical of high boiling
point ：
Use the special-purpose metal part, can
deal with the boiling point and is up to
0 in vacuum supplies of 450 degrees Centigrade
. Under 001mbar condition 。
● Viscidity and holding solid supplies
：
Soak to blow block produce strong shear
strength , can lighten the viscidity of
the mixture very considerably liquid film
in, so, can deal with the supplies that
viscidity reach 50Pas 。
● The solid content has the material to
spare ：
Soak to blow stretch produce one strong
mixing strength , can prevent the solid
from marry dirt in heating surface too liquid
film in 。
● Sensitive supplies of color ：
In the short distance distiller of Model
SPE, HEC Company can prevent the metal from
wearing and tearing to design a kind of
device professionally. Device this very
important, deal with color sensitive supplies
because whether volatile matter (serious
component part ) flow through distiller
influence because the metal is worn and
torn 。
● High distill than ：
Is it make blowing diaphragming accurate
to use , mean liquid film can paint foam
heat surface and is it heat surface to be
moist entirely to make even, it can meets
to be high to this distillation than demand,make
more than 90% product distillation, maintain
the leftovers of constant 。
● Low maintenance cost ：
Because rational structural design and
unique rotor, have avoided shaving the diaphragm
and metal and superficial wearing and tearing
。
Structure
characteristic ： |
1. Accurate rotor ：
The ones that soaked in the liquid film
shaved the strong turbulance that the diaphragm
produces deeply, is it heat surface produce
one better hot transmission transfer subsystem
to than other to result in (old metal excellent
to have suits of PTFE in charge of example
have), sublimating for different cyanic
acid ester of the following examples is
from gathering things in advance, the final
content is smaller than 0. 1% 。
Name |
Type
of the rotor |
SPE-B |
PTFE Manage
|
| The heat-conduction system is counted
(by the supplies) W/M2K |
59.8 |
49.5 |
| Coefficient that always conduct
heat W/M2K |
56.5 |
47.2 |
| Calorific value KW |
27.1 |
22.6 |
| Area of heating M2 |
6 |
6 |
| Evaporate the speed KG/H |
240 |
200 |
| Distill than ％ |
1.2 |
1 |
Above-mentioned examples can have : The
same different shaving results emerging
in pattern of the diaphragm of area of heating
is different, SPE-B can improve 20% of the
distillation amount 。
 |
2. Accurate built-in condenser ：
The condenser generally adopts the
serpentine, in charge of or restrain
Uly, fix it in the bottom of the distiller
, and with heating the Taxi interval
rational purity of separation , having
rate and vacuity in the distiller
that influence the products directly
or not in the form of the condenser
. So, evaporate HEC Company according
to engaged in for a long timing /experience
of distillation,design different condenser
not built-in of different craft supplies
not clear 。
3. Fog foam separator ：
The fog foam separator is very necessary
for having this product, it can be
inserted in the rotor blows the diaphragms,
can be set up behind shaving the diaphragm.
These defend and spatter the device
and is propped up and flowed any drop
carried secretly by the steam. Drop
change direction and is it is it heat
surface separate to get back to to
throw at passing they 。 |
|
|
|
|
|
